Kermit 1.18

NOTE:

• It didn’t seem to matter if we had the port setup in the
  Victor’s config.sys, it still worked.

Files:

• Win-Kermit-0.85.zip
  • Unzip to your PC
• V9K-Kermit118.zip
  • Transfer the kerm118.exe file to your Victor

Cable:

• This needs at least a basic null modem cable
  with at least Rx/Tx crossed and Ground connected.
• USB to Serial adapters work fine.
• Use 9-to-25 serial adapter and/or gender changer as needed.

Instructions:

1. (Victor) Boot Victor MS-DOS
2. (Victor) kerm118.exe
3. (Victor) set baud 19200
4. (PC) Start Kermit 0.85 (kermit.exe)
5. (PC) Configure -> Communications
   • Baud Rate: 19200
   • Handshake: check XOn/XOff
   • Port: (whatever your PC port is)
6. (PC) Session -> Connect
7. (Victor) receive
8. (PC) Kermit -> Send
   • You can send multiple files at once – just add them to the queue
   • Adding *.* will add all files in the selected directory
9. (Victor) exit
10. For Victor to PC Trx: Use Kermit -> Receive on PC and send filename on Victor